1. pharmaceutical tablet machine before use, all the oil cup, oil hole and friction surface should add lubricating oil, spread oil film on the friction surface, prolong the life of the machine;

2. each shift must be tried before and after, if there is no problem can increase the voltage, prolong the life of the mold;

3. Selection of sheet type (die) : the working end face of the upper and lower punch of the tablet die forms the surface shape of the tablet, and the medium-sized aperture is the diameter of the tablet. The correct selection of slice type is the first step of the success of the stamping die.

4. When replacing the mold, if you can't get the medium size, you can knock off the medium size gently with a stick of the same size as the upper mold;

5. pharmaceutical tablet press in the process of tablet should often check the tablet quality (tablet weight, hardness, surface roughness, etc.), timely adjustment;

6. the suppression of mineral, plant fiber content, large diameter, poor viscosity of the material, should be used at low speed, on the contrary, if the suppression of viscosity, good fluidity, small diameter, easy to granulation particles, you can choose a higher speed;

7. mold preservation method: after cleaning, coated with food-grade lubricating oil (oil, edible oil can be), put into a special protective box or mold storage box, put on the shelf, marked with specifications and dimensions, put on the shelf for preservation;

8. When the tablet room is operated or not operated, it is closed with plexiglass to prevent pollution.